Rev a shelf template

Rev a shelf template DEFAULT
• Ideal for use in blind corner base cabinets • Installs in minutes with only a phillips screwdriver and a suitable drill • Smooth, solid polymer shelves won’t catch recessed door panels and are easy to clean • Minimum inside cabinet depth: 31” tray - 20”, 33” tray - 19”, 39” tray - /2” • If installing into a frameless cabinet, you must add /4” to the minimum opening dimensions • All sets include appropriate mounting hardware (shelf supports, positioner bases, 90° hinge euro brackets, center shaft, slides, mounting brackets, and template) • Color coded shelf supports match the shelf and provide maximum deflection support
UOMST
Size39" dia.
Supplier Part Number
Loading
Sours: https://www.chbriggs.com/axpwp-rev-a-shelfpolymer-two-tier-half-moon-susans.html

Rev-A-Shelf CR User Manual

background image

/16""

12"

LOCKING SCREW

(M)

SHAFT LOCKING SCREW

(M)

UPPER PIVOT SUPPORT

()

SHAFT

()

SHELF SUPPORT

()

BOTTOM POSITIONER

()

UPPER POSITIONER

()

/8"

SHAFT LOCKING SCREW

(M)

21"

/2"

FIGURE 1

32"

DIMEMSIONS ARE

"MINIMUM"

INSTALLATION TEMPLATE

ON REVERSE SIDE.

3. Locate the mounting holes with the template and afix the upper pivot support to the underside of the

cabinet top (see Figure 2) with four (4) 1/2" x #8 (F) oval head screws.

6. Adjust the upper shelf position by grasping and supporting the upper shelf positioner assembly while

loosening the locking screw. Rotate the positioner and shelf into alignment and securely tighten the

locking screw.

5. Insert the upper shaft assembly into the top end of the shaft. Loosely install the lock screw. Insert the

shaft/tray assembly into the bottom positioner. Extend the upper shaft assembly to engage the upper

pivot support (See Figure 2).

4. Working from bottom up, slide the upper shelf onto the shaft. Slide the upper positioner onto the shaft and

temporarily tighten the screw with the positioner approximately 15" from the bottom of the shaft. Slide the

bottom shelf onto the shaft.

2. Locate the mounting holes with the template (see reverse side) and afix the bottom positioner to the

cabinet floor with four (4) 3/4" x #8 (F) oval head screws. NOTE: Shaft locking screw must

face cabinet opening.

1. The dimensions shown in Figure 1. are minimum.

FIGURE 2

UPPER SHAFT ASSEMBLY

()

28" - 32" REVOLVING KIDNEY

INSTALLATION INSTRUCTIONS

PREMIERE CHROME LAZY SUSANS

28"

DIMEMSIONS ARE

"MINIMUM"

5"

/16"

18"

Sours: https://www.manualsdir.com/manuals//rev-a-shelfcrcr.html
  1. Isr4451 eol
  2. Hunts photo specials
  3. Trijicon aurora
  4. Bhagwan ki photo
  5. 2010 lincoln navigator

DIY Kitchen: Rev-A-Shelf Pull Out Garbage Container With Hardware Hut

This is a sponsored post for Hardware Hut. However, all opinions are my own.

You Guys!!!! This is probably our FAVORITE new feature that we added to our home thus far! Annoyed by our large ugly garbage can and the fact that we didn&#;t have a space for it in the new home, we decided to look for a solution. While looking at pulls for our kitchen cabinetry on Hardware Hut, we came across the fantastic DIY Pull Out Garbage Containers which are installed into one of your existing cabinets. Read on to find out just how simple this installation is and how awesome it looks when finished!

I&#;m so lucky to have such a handy handsome husband (I know, I know. I&#;m always bragging at how handsome he is). The Rev-A-Shelf kit, from Hardware Hut, came with two garbage cans as well as all the parts to complete this project. More importantly, it arrive with very detailed instructions and even a template!

Due to the size of the cabinet we chose to use for this install, Neil had to make a quick drive over to Home Depot to grab a piece of wood. Since I am not THAT handy, I&#;m going to let Neil take it from here and explain the step by step process via our compiled Instagram stories (video below) since he did the work and I was in charge of the snacks!

Take it away Neil&#;.. Here&#;s his YouTube debut. Ha!

It took Neil about 30 minutes from start finish! If you are handy with tools, it shouldn&#;t take more than 30 minutes, although prepare for an hour just in case. The template was so easy to use too! Click HERE to purchase your own! I linked the same exact one we used in our cabinet and it&#;s fantastic! We use one bin for recyclables and the other for garbage. Hardware Hut has a variety of styles to fit any cabinet. We absolutely love ours and it&#;s definitely a must if you don&#;t want a garbage can out in the open like we did before! Also, check out our cabinet pulls! These are also from Hardware Hut and can be purchased, HERE. You can also check out my last post on that install, HERE.

DIY Pull Out Garbage Containers
DIY Pull Out Garbage Containers

We chose to install the Rev-A-Shelf Pull Out Garbage Containers in the cabinet directly to the right of our kitchen sink. Using the template, Neil installed the bottom metal bracket into the cabinet. He then attached a wood board to the back of our cabinet door (the cabinet we chose was too wide but if you have a standard cabinet, you are good to go) and then he installed the garbage can holder frame to the wood/cabinet door.

DIY Pull Out Garbage Containers
DIY Pull Out Garbage Containers
DIY Pull Out Garbage Containers
DIY Pull Out Garbage Containers

All in all, it was a super quick and easy process. We absolutely love this new feature to our kitchen. Let me know what you think! It&#;s the simple things in life, right?!?!

Like this:

Sours: https://champagnecoloredglasses.com/diy-kitchen-rev-a-shelf-pull-out-garbage-container-with-hardware-hut/
Rev-A-Shelf CH Hamper Installation Instructions by KitchenSource.com

.

A template rev shelf

.

How to Install a Rev-A-Shelf Lazy Susan

.

Now discussing:

.



149 150 151 152 153