Oil burner stem

Oil burner stem DEFAULT
Acrylic Mini Bubbler Oil Burner 10mm
Bent Curve Oil Burner with Color Head

Bent Curve Oil Burner with Color Head

Bent Curve Oil Burner with Color Head 14M Size: 14mm Color available: Green, Blue Color: Random (For specific color request, please leave us a ORDER NOTE located at the very bottom of your check out

Color Body Glass Oil Burner Bubbler 14mm Stem 6 inches
Color Bubble Oil Burner Bubbler Water Pipe 8 inches

Color Bubble Oil Burner Bubbler Water Pipe 8 inches

Color Bubble Oil Burner Bubbler Water Pipe 8 inches Color: Random (For specific color request, please leave us an ORDER NOTE located at the very bottom of your check out page, and we will address

Sale!
Color Change Body Oil Burner Bubbler Glass 5 inches
Color Change Glass Oil Burner Bubbler Pipe Design 9 inches
Sale!
Color Glass 6 inches Bulb Oil Burner Bubbler Pipe
Color Glass Oil Burner Bubbler Pipe Water Bong 7 inches
Color Sleeve Glass Bottle Oil Burner Bubbler 7 inches
Double Skull Green Or Blue Color Oil Burner Bubbler
Fancy Body Oil Burner Bubbler Glass One
Fancy Dual Dome Body Oil Burner Bubbler 5 inches
Fancy Mini Glass Oil Burner Bubbler 10mm
Fancy Tube Glass Oil Burner Bubbler 6 inches
3.5" Mini Flat Flask design Acrylic Oil Burner Bubbler
Glass Clear Mini Size Skull Oil Burner Bubbler 4 inches
Glass Oil Bubbler 5 inches Mini

Glass Oil Burner Bubbler Torch Kit

Glass Oil Burner Concentrate Pipe Set 18mm Dome Titanium Nail with Pouch Sets This set includes a 18mm glass dome, a 18mm hand glass pipe a 18mm Titanium nail , a glass dabber , a

Glass Skull Oil Burner Bubbler Black 4 inches
Global Glass Oil Burner Bubbler 5.5 inches
Inner Color Stem Oil Burner Bubbler Glass Pipe 5 inches
Mini 5 inches Bulb Oil Burner Bubbler Glass Pipe Color
Mini Hand Oil Burner Bubbler Inner Stem 4 inches
Glass Nectar Collector 14mm Kit
New Color Skull Oil Burner Bubbler
Oil Bubbler Cylinder Drum Design
Oil Burner Bubbler 6 Inches Owl Design Clear Glass 14mm
Oil Burner Bubbler Bear Design Clear Glass 6 inches
Oil Burner Bubbler Cylinder Clear Glass Fancy Design 7 inches
Oil Burner Bubbler Glass Bubble 5 inches with Base
Oil Burner Bubbler Glass Pipe Color Skull 6 inches
6" clear glass 2 parts oil burner bubbler water pipe 14mm downstem

Oil burner bubbler Pipe 14mm 6″

6" clear glass 2 parts oil burner bubbler water pipe 14mm downstem two parts design, water pipe body and glass downstem bent oil burner 14mm Glass on Glass 14mm joint. Height: about 6 inches.

Oil Burner Bubbler Small Bottle 4 inches
Oil Burner Hand Bubbler Mini Inner Stem
Glass Oil Burner dual chamber Bubbler Pipe 5" two chamber

Oil dual chamber Bubbler Pipe

Glass Oil Burner dual chamber Bubbler Pipe 5" two chamber 3 parts (2 rubber rings, 1 tube glass,1 glass water container dual chambers,1 bent oil burner ) , body about 3" , total about 5" to

Silicon Loop Bubbler Oil Rig with Banger
Silicone Water Pipe 5 inches Bubbler with Banger
Thick Glass Oil Burner Bubbler Cylinder Design
Glass Green Color Oil Burner Bubbler Pipe for Oil Wax thick heavy glass with Carry Case and Silicone Jar

Thick Oil Burner Bubbler Pipe 5″

Glass Color Oil Burner Bubbler Pipe for Oil Wax thick heavy glass 3 pieces(1 rubber ring, 1 tube glass,1 water container glass) they are about 4" to 5" tall.

Top Puff For Travel Glass Water Bong

Amber Oil Burner 5″ Bubbler Kit

Glass Yellow Color Oil Burner Bubbler Pipe for Oil Wax thick heavy w/ Carry Case and Silicon Jar 3 pieces( 1 rubber ring, 1 tube glass,1 water container glass) they are about 4" to 5" tall. the

Glass Blue Color Oil Burner Bubbler Pipe for Oil Wax thick heavy glass with Carry Case and Silicone Jar

Blue Oil Burner Bubbler Set

Glass Blue Color Oil Burner Bubbler Pipe for Oil Wax thick heavy glass with Carry Case and Silicone Jar 3 pieces( 1 rubber ring, 1 tube glass,1 water container glass) they are about 4" to 5" tall.

Color Change Oil Bubbler 5″ Set

Glass Color Change Oil Burner Bubbler Pipe for Oil Wax thick heavy glass with Carry Case and Silicon Jar 3 pieces( 1 rubber ring, 1 tube glass,,1 water container glass) they are about 4" to 5"

Glass Clear Oil Burner Bubbler Pipe for Oil Wax SCTC Thick Glass with CARB

Cylinder Oil Burner Bubbler C 5″

Glass Clear Oil Burner Bubbler Pipe for Oil Wax SCTC Thick Glass with CARB 3 pieces( 2 rubber ring, 2 tube glass,,1 water container glass) they are about 5" tall.

Cylinder Oil Burner Bubbler T 5″

Glass Clear Oil Burner Bubbler Pipe for Oil Wax SCT Thick Glass 3 pieces( 2 rubber ring, 2 tube glass,,1 water container glass) they are about 5" tall.

Glass Oil Burner Bubbler Water Pipe for Oil Wax thick glass with downstem Glass Dabber Carry Case and Silicon Jar Set

Glass Oil Burner 18mm Bubbler 8″ Set

Glass Oil Burner Bubbler Water Pipe for Oil Wax thick glass with downstem Glass Dabber Carry Case and Silicon Jar Set bubbler pipe : 2 pieces( 1 glass downstem 18mm oil burner,1 water container glass)

Glass Oil Burner pipe Bubbler clear

Glass Oil Burner Bubbler 5″

Glass Clear Oil Burner Bubbler Pipe for Oil Wax SMG 3 pieces( 2 rubber ring, 2 tube glass,,1 water container glass) they are about 4" to 6" tall.

Glass Clear Oil Burner Bubbler Pipe for Oil Wax thick heavy glass with Carry Case and Silicone Jar

Glass Oil Burner Bubbler 5″ Kit

Glass Clear Oil Burner Bubbler Pipe for Oil Wax thick heavy glass with Carry Case and Silicone Jar 3 pieces( 1 rubber ring, 1 tube glass,1 water container glass) they are about 4" to 5"

Glass Oil Burner pipe Bubbler clear.

Glass Oil Burner Bubbler BJ

Glass Oil Burner pipe Bubbler clear. 3 pieces( 2 rubber ring, 2 tube glass,,1 water container glass) they are about 5" tall.

Glass Oil Burner pipe Bubbler clear.

Glass Oil Burner Bubbler BP

Glass Oil Burner pipe Bubbler clear. 3 pieces( 2 rubber ring, 2 tube glass,,1 water container glass) they are about 5" tall.

Glass Green Color Oil Burner Bubbler Pipe for Oil Wax thick heavy glass with Carry Case and Silicone Jar

Green Oil Burner Bubbler Kit

Glass Green Color Oil Burner Bubbler Pipe for Oil Wax thick heavy glass with Carry Case and Silicone Jar 3 pieces(1 rubber ring, 1 tube glass,1 water container glass) they are about 4" to 5" tall.

Heavy Oil Burner Bubbler 8″ Kit

Heavy Glass Oil Burner Bubbler Pipe for Oil Wax Thick Set 3 pieces( 2 rubber ring, 2 tube glass,1 water container glass) About 7" to 8" tall. the body about 3" to 4" diameter. this

4.5" Glass Portable Oil Burner Pipe Bubbler Coil Perc LED Light

LED Oil Burner Coil Perc Bubbler 5″

4.5" Glass Portable Oil Burner Pipe Bubbler Coil Perc LED Light 3 pieces( glass 10mm male oil burner, 20" silicone tube mouth, glass water container with inner coil perc and LED Light) About 4.5" height.

5" Thick Glass Clear Oil Burner Mushroom Bubbler Pipe

Oil Bubbler Thick Mushroom 5“

5" Thick Glass Clear Oil Burner Mushroom Bubbler Pipe Thick Glass. 3 pieces( 2 rubber ring, 2 tube glass,,1 water container glass) . About 4" to 6" tall.

Oil Burner Mushroom Bubbler 6"
One Piece Oil burner glass pipe with build-in downstem and stand base

Oil Burner Bubbler Thick 5″ JTB

Glass Clear Oil Burner Bubbler Pipe for Oil Wax Thick Glass JTB 5" inches 3 pieces( 2 rubber ring, 2 tube glass,,1 water container glass) they are about 5" tall.

7“ Clear Glass Oil Burner Bubbler Pipe Flat Gourd Shape

Oil Burner Flat Gourd Bubbler 7″

7“ Clear Glass Oil Burner Bubbler Pipe Flat Gourd Shape 3 pieces( 2 rubber ring, 2 tube glass,1 water container glass) Total about 6" to 7" tall. Use 12mm thick bent oil burner parts.

Glass Clear Oil Burner Mushroom Bubbler Pipe SG for Oil Wax

Oil Burner Mushroom Bubbler Small

Glass Clear Oil Burner Mushroom Bubbler Pipe SG for Oil Wax 3 pieces( 2 rubber ring, 2 tube glass,,1 water container glass) they are about 4" to 6" tall.

Thick Cylinder Oil Burner Bubbler 4″

4" Thick Cylinder Glass Clear Oil Burner Bubbler Pipe for Oil Wax Thick Glass. About 4" length and 3" height. 3 pieces( 2 rubber ring, 2 tube glass, 1 water container glass)

Thick Cylinder Glass Clear Oil Burner Bubbler Pipe for Oil Wax
Sours: https://ssmokeshop.com/product-category/oil-burner-bubbler/

US1542379A - Oil burner - Google Patents

June 16, 1925. 1,542,379

J. R. FLAHERTY OIL BURNER Filed May 19. 1924 3 Sheets-Sheet 1 /I///// I I /f9 JoAn I8 Faber/ June 16-, 1 925. 1,542,379

J.R.FLAHERTY 'oIL aununn Filed May 19. 1924 3 Shets-Sheet 2 l4 7OENEY June 16, 1925.

J. R. FLAHERTY OIL BURNER Filed May 19. 1924 3 Sheets-Sheet 5 V I I 7" TOEA EY Patented June 16, 1925.

UNITED STATES JOHN R. FLAHERTY, OF-ST. LOUIS, MISSOURI.

OIL BURNER,

Application filed Kay 19,

To all whom it may concern:

Be it known that I,- JOHN R. FL'AHERTY,

a citizen of the United States, residing at the city'of St. Louis, State of Missouri, haveinvented'a certain new and useful Improvenient in .Oil Burners, of which the following is a specification, reference being had to the'accompanying, drawings, forming a part thereo a This invention relates to a certain new and useful improvement in oil-burners and has for its chief object the provision of an oil burner that is relatively simple, inexpensive, and compact in form and construction and eflicient and comparatively noiseless in. operation.

With the above and other objects in view, mypresent invention resides in the novel features of form, construction, arrangement, and combination of parts hereinafter described and pointed out in the claims,

In the accompan ing drawings, Figure 1 is an e evational view of an 011- burner embodying my invention;

Figure 2 is a vertical sectional View of the burner;

Figure 3 is a plan view of the burner; Figure 4 is a similar view partly broken away and in i section and. with the oilvaporizing disk and fan omitted,

Figure 5 is an enlarged fragmental view, showing the motor, fan, oil-vaporizing disk in section;

Figure 6 is a burner; and

Figure 7 is an inverted plan view of the burner-parts of Figure 5.,

Referring now more-in detail and by reference characters to the drawings, which illustrate a preferred embodiment of my invention, 1 designates the base of the burner, which is preferably in the form of a hollow frusto-conical casting cut-away or apertured, as at 2, for-purposes shortly app-tiring, and recessed at its upper margin, as at 3, to provide an annular seat for a ring-shaped lower shell-member 4 flanged and shouldered at plan view of the fanof the its upper margin, as at 5, to, in turn, provide aneannular seat for "a second ring-shaped or companion shell memberfi and for the .prefr erab y obliquely disposed legs 7 of a fourth casting 8 for the most part enc'irclin the upper she'll-casting 6, as best seen in F1 ure 1. The legs 7 are preferably dispose 1n the plane of. the inner periphery of the casting 8 and are obliquely continued upwardly for purposes shortly appearing.

1924. Serial No. 714,400.

upon the inner periphery of the casting 8 to provide spacers 9, for concentrically spacing the casting 8 from the encircled casting 6, the casting 8 preferably flaring outwardly at its upper margin, as at 10. Below the horizontal plane of the outer casting 8, the

encircled casting 6 is formed witha series of cut-outs to provide the shell with a plurality of air-inlets or apertures, as at 11.

Disposed in spaced relation within, and integrally joined by connecting-lugs 12 to the lower shell-casting 4, is a water-basin 13 formed in its end-wall with an out-let 14 communicating with a water exhaust-pipe 15 Ieading through the base-aperture 2 to a suitable place of discharge. 1

Disposed over, and supported by means of inwardly projecting lugs 16 on the shellmember 4, is a water-retaining or cap-member 17 apertured in itsend Wall, as at 18,

Seated in and pro ecting through the basin 13 at approximately its axial center, is a tubular-member or stem 19 that extends at its upper end through the aperture 18 to adjacent the upper margin of the encircled upper shell-cast-ing 6 and at its lower end has communication-with a pipe 20 lead ing from a suitable source of crude-oil or other fuel supply (not shown). v

Fixed on the stem, is a suitable bearingcollar 21, and disposed on the stem 19 and supported preferably for anti-friction rotation by thecollar 21, as best seen in Figure '5, is a tubular casting 22, preferably integral with which, atits lower end and disposed preferably somewhat above the horizontal plane of the upper margin of the basin 13, as best seen in Figure 2, is a so-called water- *wheel or turbine 23 comprising an annular series of suitable spaced blades 24. Leading through the base-aperture 2 and the end-Wall pingement engagement of the discharging water.

Carried by and suitably fixed to the upper end of the casting 22, is a disk 27 formed within its area with an integral series of ed around the stem 19 and thread-seate at its lower end, as at 29, upon and to rotate with the casting22, is a tubular-extension 30, fixed upon which adjacent its upper end is a burnerdisk' 31 formed with a multiplicity of annular perforations 32 and an annular series of approximately or so-calledmoon-shaped openings 33.

Connected to the upper end of the stem 19 by a- T-coupling or the like 34, and disposed horizontally over the rotatable burnerdisk 31, as best seen in Figures 2 and 3, is a stationary discharge pipe 35 provided with a series of discharge-o1ifices.36; and coiled within the upper shell-casting 6 with its one or lower end communicating, as at 37, with .the water-Suppl pipe and its upper end discharging t rough a reduced .or jet orifice 38 ,uponthe burner-plate or. disk 31, as seen in Figures 2 and 3, is a water-heating coil 39. I

In use and operation, the crude 'oil or other fuel supplied to the stem 19 discharges through the outlet-orifices 36 of pipe upon the rotating burnerrdisk 31, where either as liquid or vapor it is ignited, and where the various openings 32 and 33 effect a breaking up and s reading of the fuel. At the same time, un er the force of water discharging upon the blades 24 under suitable pressure through the nozzle-outlet 26 of the water supply pipe 25, the casting 22 and its carriedfan'27 and burner-disk 31*are rotarily actu ated upon the stem 19, some of such water supply discharging through the nozzle-outlet'38 upon the burner-disk 31 in a thin stream or jet initially cold and subsequently,

'after the burner has been in operation, as

hot water and steam. The apertures 11 in the upper shell member 6 permit the entrance of air, which, under the action of the fanblades 28, the latter being arcuated at their edges and, largely upset to extend obliquely to the rotating plane of the fan-disk, is forced upwardly through the openings of the disk 31. and thoroughly mixed with the discharging liquid or vapor fuel, effecting, in association with the discharging water or steam, a burning-of the crude oil with a clear, white, hot flame and substantially total combustion of the fuel without carbonand'smoke. Due also to the novel form of the fan-blades 28 and of the disk 31, the fuel is largely centripetally acted upon and driven inwardly towards the supply pipe .or stem 19, whereby more or less mtense heating of such pipe and 'its discharging fuel and consequent ready combustion there- "of are obtained. 1 may'add that the enficlosing shell member 8, whifih at its upper margin projects abovethe plane of the shell 6, functions to confine the flame and direct the same and theheat thereof upwardly.

I through'the' furnace, stove, or other heating structure within which the burner may be arranged, the base aperture 2 and the spaces between the basin 13 and shell 4 furnishing openings 11 in the ring orshell-member 6,

the air is given a so-called rolling movement as it is drawn into the shell under the action of the fan 27, which, I have found, greatly facilitates combustion.

My new burner is relative] simple in form, may beconstructed at low cost, and is exceedingly efficient in the performance of its intended functions. l

I am aware that changes in the form, construction, arrangement, and combination of the several parts of the burner may be made and substituted. for those herein shown and described without departing from the nature and principle of my invention.

Having thus described my 'invention,'what I- claim and desire to secure by Letters Patent is:

1. An oil-burner comprising a shell, a burner-disk having a multiplicity of '0 enings mounted for rotation within the s ell, means for effecting rotation of the disk, and means including a stationary pipe provided lengthwisewith a series of discharge orifices disposed horizontall over the disk for supplym fuel to the k. n

2.- in oil-burner comprising an apertured shell, a burner-disk having a multiplicity of olpenings mounted for rotation within the s ell, a rotary fan disposed in s aced relation under the disk, means for e ecting rotation of the disk and fan, and means including a pipe provided lengthwise with a series of discharge orifices dis osed horizontally over the disk for supplying fuel to and upon the disk.

3. An oil-burner comprising an apertured shell, a fiat burner-disk provided with a multiplicity of openings mounted for rotation within the shell,.a rotary fan disposed 1n spaced relation under the disk, means for effecting a rotation of .the disk and fan, and means'including a pi e prdvidedleng'thwise with a series ofdisc horizontally over the disk for supplying fuel to and upon the disk. I

4. An oil-burner comprising an apertured shell, a burner-disk provided with a multiplicity of openings mounted for rotation 7 effecting rotation of the disk and fan, and

means including a perforated pipe provided lengthwise'with a series of discharge orifices disposed horizontally over the disk for su gilg'kmg combustible fuel to and upon 1: e

arge orifices disposed 5. An oil-burner comprising an apertured shell, a fuel supply stem projecting upwardly through the shell, a burner-disk provided with a multiplicity of openings mounted for rotation upon the stem, a fan mounted for rotation upon the stem and disposed in spaced relation under the disk,

means for discharging water upon the disk,

means including a water-wheel also mount-' ed upon the stem and having connection with the fan and disk for effecting rotation shell, a fuel-supply stem projecting upwardly through the shell, a burner-disk having a multiplicity of openings mounted for rotation upon the stem, a fan mounted for rotation upon the stem and disposed in spaced relation under the disk, a water-coildisposed within the shell and discharging upon the disk,means including a water wheel also mounted upon the stem and havingconnection with the fan and disk for effect in'g rotation thereof, and a perforated dis;

charge pipe mounted upon the stem and disposed horizontally over the disk for supplying fuel to the disk.

-7. An oil-burner com rising a base, an

apertured shell mount upon the base, a water basin fixed within the shell, a fuelsupply stem projecting upwardly inv the shell and throu h the basin, a tubular casting disposed within the shell for rotation" upon the stem, a burner-disk provided with a multiplicity of openings fixed upon the casting, a fan also fixed upon the casting and disposed in spaced relation under the disk, a water wheel also carried by the casting and disposed in spaced relation under thefan, a water supply pipe discharging upon the wheel for efi'ecting rotation of the casting and its carried diskand fan, a water coil disposed in the shell having communication with said water supply pipe and discharging upon the disk, and a perforated dischar e p1pe mounted upon the stem and dispose horizontally over the disk for supplylng fuel to the disk.

8'. An oil-burner comprising a base, an apertured shell mounted upon the base, a

water basin fixed within the shell, a fuelsupply stem projecting upwardly in the shell and through the basin, a tubular casting disposed within the shell for rotation upon the stem, a burner-disk provided with a multiplicity of openings fixed upon the casting, a fan also fixed upon the casting and disposed in spaced relation under the disk, a water wheel also carried by the casting and disposed in spaced relation under the fan, a water supply pipe discharging upon the wheel for effecting rotation of the castin and its carried disk and fan, a water coil dlsposed in the shell having communication with said water supply pipe and Hischarging upon the disk, a perforated discharge pipe mounted upon the stem and disposed horizontall over the disk for supplying fuel to the isk, and a ring-shaped castin disposed in spaced encircling relation a out and artly above the plane of the shell for con ing the flame of the disk.

9. An oil-burner comprising an apertured shell, a burner disk mounted for rotation within the shell, said disk having a multiplicity of annular perforations and an annular series of approximately moon-shaped openings, means for efi'ectin rotation of the disk, and means for disc arging combustible fluid over and upon the disk.

In testimony whereof, I have signed my name to this specification.

Sours: https://www.google.vg/patents/US1542379
  1. Nvidia lighting
  2. Exo drone x7 review
  3. Chasing a man meme

*** This is a website for age 18+ only ***

Shipping:

Order over $50: Free standard shipping only apply to package no more than 13oz; still need to pay for expedite.

E-Mail: [email protected]
207-200-5642

 
Sours: https://www.wholesalecentral.com/prider/store.cfm?event=showcatalog&catid=140753
Making Glass Tubes with a Bubble on the End

Glass Oil Burner Pipe attachment for Water Pipe,

FREE SHIPPING SimpleGlassPipe® is proud to now offer a free shipping option for all USA orders. SimpleGlassPipe® ships all orders via the United States Postal Service, FedEx or DHL Express. Free Shipping apply to 48 contiguous states only. Orders will be processed with the cheapest shipping option with delivery times ranging from 3-16 business days. Expedited services such as 1-3 Day USPS. Shipping times are estimated by shipping carrier and are not guaranteed through SimpleGlassPipe.

DISCREET BILLING/SHIPPING/PACKAGING: We value your privacy and work hard to guarantee that 100% of your information is safe with us. One part of that process includes discreet shipping and billing. When you order from us there is no need to worry about anyone knowing what is inside your package. Each order is packaged in a plain brown or white box with no store or product information listed. To protect this even further our return address on your shipping label will read "SGP Online". We promise that no mention of product or "SimpleGlassPipe" will be displayed on your package. For international shipments it is required that we list product names and values on the customs forms. In this case if you are outside the US you will see product information but everything else will be the same as above. All purchases made from our site must will appear on your statements as "SGP ONline" however there will be no mention of "smoke shop" or anything similar to protect your privacy. Product names will NOT be listed on your statements, just the order total, date, and "SGP ONline".

DELIVERY TIME:

Packages shipped domestically via USPS Priority Mail and FedEx Home Delivery are typically delivered within 2-3 business days. Although First Class Mail offers a more economical shipping solution, delivery times can be considerably longer than Priority Mail or FedEx services. Packages shipped domestically via USPS First Class mail are typically delivered in 2-9 days depending on the distance from our distribution center in Missouri (not including Hawaii and Alaska). These times are estimated by the United States Postal Service and are not guaranteed through SimpleGlassPipe®. Shipments delivered outside the estimated delivery date are not the responsibility of SimpleGlassPipe® and will not be refunded. Estimated shipping times may vary slightly during extremely busy times such as sales events and holidays.

Sours: https://simpleglasspipe.com/

Burner stem oil

.

How to actually blow a glass pipe (no bullshit)

.

Now discussing:

.



590 591 592 593 594