Audi s5 test pipes

Audi s5 test pipes DEFAULT

Data sheet

Engine TypeL Supercharged

More info

Compatible Vehicles:

  • Audi A4 S4 B8 B T V6 Supercharger
  • Audi A5 S5 B8 B T V6 Supercharger
  • Audi Q5 B8 T V6 Supercharger
  • Audi SQ5 B8 T V6 Supercharger
  • Audi A6 C7 T V6 Supercharger
  • Audi A7 C7 T V6 Supercharger
  • Audi A8 D4 T V6 Supercharger

Available Options:

  • Heat Shielding with ceramic inner liner - the best way to reduce radiant heat up to 70%. Usual thermal wraps not even close in effectiveness and durability to the Heat Shields.
  • Optional Gasket set- 2 upper, 2 lower (Recommended if car has over 50K miles)
  • Tunable Straight 02 Spacer pair 

Main Features:

  • in OD with smooth transition to OEM-spec bottom flanges
  • Double walled pipe ends for superior strength over our competitors
  • designed to fit OEM Mid-Pipes
  • significant power gain
  • better throttle response 
  • reducing under hood temperature
  • adds a very nice tone to the exhaust

Our Advantages:

  • % bolt-on installation
  • % TIG welded and back purged
  • highest quality mm wall stainless steel
  • precision CNC machined flanges
  • all brackets and mounts as on OEM unit

Notes:

OFF ROAD/MOTORSPORT USE ONLY! 

This product is not designed to meet any emissions standards and is not for street or highway use. This product is not certified and may not be legal for use on emissions controlled vehicles in any country/jurisdiction.

Customers who bought this product also bought:

Sours: https://redstarexhaustusa.com/audi-bsupercharged-test-pipes

Exhaust - Race Pipes (VERSION 2) - Stainless Steel, " (JHM) for B8 S4-S5 Q5 SQ5 T

By Purchasing any Off-Road use ONLY products from JH Motorsports, Inc. I acknowledge and understand the following disclosure. (This notice is located at the bottom of the page description of affected products on our website.)

Vehicle Code §
(b) No person shall operate or leave standing upon a highway a motor vehicle that is required to be equipped with a motor vehicle pollution control device under Part 5 (commencing with Section ) of Division 26 of the Health and Safety Code or any other certified motor vehicle pollution control device required by any other state law or any rule or regulation adopted pursuant to that law, or required to be equipped with a motor vehicle pollution control device pursuant to the National Emission Standards Act (42 U.S.C. Secs. to , inclusive) and the standards and regulations adopted pursuant to that federal act, unless the motor vehicle is equipped with the required motor vehicle pollution control device that is correctly installed and in operating condition. No person shall disconnect, modify, or alter any such required device.
(c) No person shall install, sell, offer for sale, or advertise any device, apparatus, or mechanism intended for use with, or as a part of, a required motor vehicle pollution control device or system that alters or modifies the original design or performance of the motor vehicle pollution control device or system. Health and Safety Code §
The provisions of this part shall not apply to:
(a) Racing vehicles.

As the aforementioned code sections outline, it is against the law to operate or use a vehicle on public streets or highways with modified, altered, or disconnected motor vehicle pollution control devices. This may include but is not limited to, Evaporative Fuel Controls, Catalysts, DPF, PTOX, PCV Systems, Exhaust Gas Recirculation Systems, Oxygen Sensors, Thermostatic Air Cleaners, Air Intake Systems, Fuel Injectors, Regulators, Adjustable Cam Gears, ECU Programming, Mapping, or other Computer Modifications. Air Pumps, Air Injection, Timing, and any other Emission System Modification(s).

Purchaser acknowledges and certifies to JH Motorsports Inc., that Purchasers vehicle will only be used for racing applications or off road vehicle use only. Purchaser requests these modifications for the purpose of enhancing the vehicle for competitive Racing Applications and will not use this vehicle on public streets or highways. Purchaser agrees to indemnify JH Motorsports Inc., all employees, officers, owners, and subsidiaries for any civil or criminal liability arising out of use of Purchasers vehicle on public streets or highways as Purchaser has been duly notified of the laws and regulations regarding disconnecting, alteration, or modification of a vehicle’s pollution control devices. Purchaser understands and has been advised the driving of a vehicle on public streets or highways could result in criminal or civil penalties.

Sours: https://jhmotorsports.com/exhaust-race-pipes-versionstainless-steeljhm-for-b8-s4-s5-q5-sq7-at.html
  1. Heart with banner clipart
  2. Nellis fitness center
  3. Husqvarna 55 rancher chain tensioner

Exhaust - Race Pipes - (VERSION 2) Stainless Steel, " (JHM) for B8-S5 L FSI (32v)

By Purchasing any Off-Road use ONLY products from JH Motorsports, Inc. I acknowledge and understand the following disclosure. (This notice is located at the bottom of the page description of affected products on our website.)

Vehicle Code §
(b) No person shall operate or leave standing upon a highway a motor vehicle that is required to be equipped with a motor vehicle pollution control device under Part 5 (commencing with Section ) of Division 26 of the Health and Safety Code or any other certified motor vehicle pollution control device required by any other state law or any rule or regulation adopted pursuant to that law, or required to be equipped with a motor vehicle pollution control device pursuant to the National Emission Standards Act (42 U.S.C. Secs. to , inclusive) and the standards and regulations adopted pursuant to that federal act, unless the motor vehicle is equipped with the required motor vehicle pollution control device that is correctly installed and in operating condition. No person shall disconnect, modify, or alter any such required device.
(c) No person shall install, sell, offer for sale, or advertise any device, apparatus, or mechanism intended for use with, or as a part of, a required motor vehicle pollution control device or system that alters or modifies the original design or performance of the motor vehicle pollution control device or system. Health and Safety Code §
The provisions of this part shall not apply to:
(a) Racing vehicles.

As the aforementioned code sections outline, it is against the law to operate or use a vehicle on public streets or highways with modified, altered, or disconnected motor vehicle pollution control devices. This may include but is not limited to, Evaporative Fuel Controls, Catalysts, DPF, PTOX, PCV Systems, Exhaust Gas Recirculation Systems, Oxygen Sensors, Thermostatic Air Cleaners, Air Intake Systems, Fuel Injectors, Regulators, Adjustable Cam Gears, ECU Programming, Mapping, or other Computer Modifications. Air Pumps, Air Injection, Timing, and any other Emission System Modification(s).

Purchaser acknowledges and certifies to JH Motorsports Inc., that Purchasers vehicle will only be used for racing applications or off road vehicle use only. Purchaser requests these modifications for the purpose of enhancing the vehicle for competitive Racing Applications and will not use this vehicle on public streets or highways. Purchaser agrees to indemnify JH Motorsports Inc., all employees, officers, owners, and subsidiaries for any civil or criminal liability arising out of use of Purchasers vehicle on public streets or highways as Purchaser has been duly notified of the laws and regulations regarding disconnecting, alteration, or modification of a vehicle’s pollution control devices. Purchaser understands and has been advised the driving of a vehicle on public streets or highways could result in criminal or civil penalties.

Sours: https://jhmotorsports.com/exhaust-race-pipes-versionstainless-steeljhm-for-b8-sl-fsiv.html
Audi RS5 B9 with CTS Test Pipes Sound Clip

Data sheet

Engine Type3.0L Supercharged

More info

Compatible Vehicles:

  • 2009-2016 Audi A4 S4 B8 B8.5 3.0T V6 Supercharger
  • 2007-2017 Audi A5 S5 B8 B8.5 3.0T V6 Supercharger
  • 2009-2019 Audi Q5 B8 3.0T V6 Supercharger
  • 2014-2019 Audi SQ5 B8 3.0T V6 Supercharger
  • 2011-2019 Audi A6 C7 3.0T V6 Supercharger
  • 2010-2019 Audi A7 C7 3.0T V6 Supercharger
  • 2011-2019 Audi A8 D4 3.0T V6 Supercharger

Available Options:

  • Heat Shielding with ceramic inner liner - the best way to reduce radiant heat up to 70%. Usual thermal wraps not even close in effectiveness and durability to the Heat Shields.
  • Optional Gasket set- 2 upper, 2 lower (Recommended if car has over 50K miles)
  • Tunable Straight 02 Spacer pair 

Main Features:

  • 2.5in OD with smooth transition to OEM-spec bottom flanges
  • Double walled pipe ends for superior strength over our competitors
  • designed to fit OEM Mid-Pipes
  • significant power gain
  • better throttle response 
  • reducing under hood temperature
  • adds a very nice tone to the exhaust

Our Advantages:

  • 100% bolt-on installation
  • 100% TIG welded and back purged
  • highest quality 2.0mm wall 304 stainless steel
  • precision CNC machined flanges
  • all brackets and mounts as on OEM unit

Notes:

OFF ROAD/MOTORSPORT USE ONLY! 

This product is not designed to meet any emissions standards and is not for street or highway use. This product is not certified and may not be legal for use on emissions controlled vehicles in any country/jurisdiction.

Customers who bought this product also bought:

Sours: https://redstarexhaustusa.com/audi-b8-30-supercharged-test-pipes

S5 test pipes audi

CTS Turbo Audi T Supercharged V6 Test Pipe set

Description

The CTS Turbo Audi T Supercharged V6 Testpipe Set is the solution you&#;ve been waiting for your Audi T V6 equipped with a supercharger. The factory cats are notorious for failure when upgrading your power output. Our test-pipes are designed to seamlessly fit in place of your restrictive stock catalysts, which are situated right before your downpipes. Our test pipes feature &#; stainless steel piping, and smooth mandrel bends.

Substantial power gains, improved exhaust flow and a more throaty sound are the main benefits of installing our test pipe. Each pipe is mandrel-bent, and TIG welded by hand.

NOTE: proper software tuning is required to avoid Check Engine Light and to ensure correct operation. Contact your local tuner for more details.

Product Details:

  • T stainless steel construction
  • TIG-welded
  • Great power upgrade or replacement for worn out parts
  • Beautiful brushed finish
  • Includes gaskets and hardware for install
  • Compatible with factory or aftermarket exhaust systems

Fitment:

  • B8/B Audi S4 T supercharged
  • B Audi S5 T supercharged
  • Audi SQ5 T supercharged
  • Audi Q5 T supercharged
  • C7 Audi A6/A7 T supercharged
  • D4 Audi A8 T supercharged

**Not legal for use on public roads; must be used for test/diagnostic purposes only!**

Additional information

Weight15 lbs
Dimensions29 × 13 × 6 in

Model

Generation

MakeModelYearGeneration
AUDIA6 - C7
AUDIQ5 - B8/
AUDIS4 - B8/
AUDIS5 - B8/
AUDISQ5 - B8/
Sours: https://www.ctsturbo.com/product/cts-turbo-audit-supercharged-v6-testpipes/
Are Test Pipes worth it on an Audi S4/S5? Catless Revs, Cold Starts, Driving - 3.0T STOCK Catback

.

You will also like:

.



947 948 949 950 951